Smoke Damage: How to Fix It?

Nothing compares to the devastation caused by a fire in a home. Your home and possessions have been burned, but you and your family are still in danger. Even after the fire has been extinguished, there is always the issue of the fire’s aftermath. Smoke, soot, water cleanup, and the chemicals used by firemen are all issues that arise often. Your burned and blackened walls and ceiling reveal the extent of the devastation to your home.

Tips to Prevent Smoke Damage

To deal with issues that arise after a fire has been extinguished, you must first remove soot and smoke odor. The following suggestions may be helpful.

Char and Soot

After a fire, soot is the residue left behind by burned objects. A high concentration of carbon-based contaminants characterizes it. It is mainly produced by incomplete combustion of the material. Plastic items are found in almost every house. When they are burned, oily molecules are discharged into the air, giving soot its oily appearance.


When soot gets into a person’s lungs, it may cause serious health problems. Soot particles are discharged into the circulation as they reach the alveoli. Impurities spread throughout the body as a result of this. The person’s health may be jeopardized if the contaminants accumulate. A smoke damage restoration company works closely with you to remediate all of your fire-damaged areas.

Cleaning Steps

Step 1: Vacuum the soot from the surfaces of the items you are cleaning. Never begin cleaning without first putting on appropriate clothing. Heavy-duty gloves, safety goggles, and masks should all be worn over your face, covering as much as possible. Cover your nose with your safety glasses and ensure no way for dust or soot to enter your eyes.


Step 2: Use the sponge to soak in the TSP solution after putting on your heavy-duty gloves. A gallon of water and one tablespoon of TSP go into the TSP solution. Working on one piece and wall at a time, work section by section. Puroclean Lanham uses safe products to clean and sanitize your home. 


Step 3: Using the sponge, wipe the surface of the wall or ceiling in a complicated and firm pattern. Rinse the ceiling and walls with clean, warm water after that. Carry on in the same manner with the other parts until they are all clean. This step may be repeated many times in a row. It depends on the state of the home after the fire and the amount of charring and soot accumulation. Water seepage into the drywall or baseboard may happen if you over-wash your ceilings and walls. TSP and warm water should not be sprayed on your walls.


Step 4: Apply a new layer of paint to all of the fire-damaged walls. The AC filters may have a significant amount of soot accumulation, which should be cleaned. Using a disinfectant, clean all appliances thoroughly. On all of the soot-affected surfaces, a new sealing coating must be placed. Bowie restoration services can help you return to normal after suffering property damage.


Many items would be destroyed as a result of the fire, necessitating their replacement. However, once you have cleaned things up, you will figure out what to replace. It may seem to be a time-consuming job, but procrastination will only make things worse. After you have cleaned your home, you will need to decide what to replace and fix and budget for it.