Ways to Prevent Water Damage in the Attic

Water damage to dry framing isn’t hard to locate, however you should not be afraid of the attic. Unfortunately, many people fear entering this insect-infested, rodent-infested, ultimate-darkness place. However, you can always hire a professional contractor; hopefully, they will not be.

Since the attic is located at the top of your home, dividing the roof from the entire house and controlling your home’s natural drying out needs to start there.

Preventing Water Damage in the Attic

Now comes the subject of how to prevent water damage in your attic, and what should you look for? But don’t get ahead of yourself. First, let’s discuss a couple of things.

The Flooring and the Ceiling

When inspecting the attic, make sure to look both up and down. First, pay attention to openings in the roof, such as pipes, vents, and the chimney. Next, examine the area to make sure that all surfaces are dry and free of mold or decay. Also, examine the roof sheathing and rafters at the bottom. It is best to inspect the roof in the morning to ensure it is properly sealed and that no daylight enters through roof cracks. Finally, check to see if the flooring is completely dry. Click here to learn more about water damage.

Canisters for Recessed Lighting

Rust and corrosion show the possibility of moisture intrusion and an electrical danger. Stains above or near the wood and stains on the insulation around the canisters are other hints of possible water damage. Replace old recessed light canisters with newer, safer canisters with built-in insulation.

Vents

The attic ventilation is so crucial. Vents are commonly positioned near the roof’s peak. Moisture or discoloration of the surface near vents is an indication. Locate the source of the moisture and fix the problem. Get rid of any bird nests or debris that is blocking the vents when inspecting the roof. Check out PuroClean restoration services to find out more about water damage.

Insulation

The insulation ends up being thin and flat when it is affected by moisture and water. Inspect the insulation always, particularly after the rainy season has passed. Touch it. If it appears damp, locate the source of moisture and resolve the issue as soon as possible. Remember that wet insulation is ineffective, but it will hold water for a long time and create extreme moisture levels. If the insulation is moist, it should be replaced.

Common Attic Appliances

Inspect attic air conditioners, swamp coolers, and HVAC systems regularly. Check for signs of wear and strain and lose connections. Also, check out the area around and beneath these appliances. Remember that malfunctioning appliances can lead to water damage to everything underneath.

Conclusion

When entering an attic, keep safety in mind. Every area that is now wet would be one of the most accessible water spots and damage to areas. Because most individuals are familiar with what moist things look like, these moist areas are often easy to discover.

If you find wet drywall, plaster, framework, or installation in your attic, you need to speak to a professional to repair the water damage as quickly as possible. Allowing this damage to continue can end up costing you more money in the long term. Water damage can also urge the dreaded dangerous mold right into your home, something no person wants to discuss.